Vivitek Projector DH758UST
Peace of mind and lower total cost of ownership
The D757WT is the ultimate ultra-short-throw projector for the education that delivers a large 80” to 100” image from an ultra-short distance and enables perfect presentation without shadow obstruction and light glare in the presenter’s eyes. The projector delivers a high brightness with 3,300 ANSI Lumens and an outstanding contrast ratio of 10,000:1 for a perfectly displayed image.
DLP (Digital Light Processing) is a display technology from Texas Instruments (TI). The technology inside is often referred to as DMD (Digital Micro-Mirrors). It consists of an array of mirrors where each mirror represents a pixel element. For example, a high-definition DLP projector or rear projector with 1920 x 1080 pixel resolution would have over 2 million tiny mirrors. Each mirror is attached to an electronically driven hinge that controls the amount of colored light that is reflected from.
BrilliantColor from Texas Instruments is a multi-color processing technology that produces vibrant images. BrilliantColor technology uses up to six colors, instead of just the three primary colors, red, green and blue, to improve color accuracy and brightens secondary colors.
A projector that is 3D Ready can accept a 120Hz frame-sequential 3D signal from a computer. These projectors are not compatible with the HDMI 1.4 3D specification used on 3D Blu-ray players and set-top boxes. 3D ready uses DLP Link Technology from Texas Instruments.
HDMI (High Definition Multimedia Interface) is an uncompressed, all-digital audio/video interface that supports audio/video sources such as a set-top box, DVD player, A/V receiver, and video monitors such as a digital projector or digital television (DTV). HDMI is backward compatible with DVI 1.0 specification and supports HDCP.
|Native Resolution||1080p (1920x1080)|
|Brightness||3500 ANSI Lumens|
|Max. Supported Resolution||WUXGA (1600 x 1200) @60Hz|
|Native Aspect Ratio||16:9|
|Lamp Life and Type||3,000 / 7,000 Hours (Normal / Eco. Mode), 280W/230W|
|Display Type||Single chip DLP® Technology by Texas Instruments|
|Chip Size||0.65” DMD|
|Image Size (Diagonal)||88" - 110"|
|Projection Distance||341 - 510 mm|
|Projection Lens||F = 2.5, f = 5.1 mm|
|Zoom Ratio||Fixed 1x|
|Offset (Based on Full Image Height)||124%|
|Keystone Correction||Vertical +/-40°|
|Speakers||10W x 2|
|Video Compatibility||SDTV (480i, 576i) / EDTV (480p, 576p) / HDTV (720p, 1080i, 1080p), NTSC (M, 3.58/4.43 MHz), PAL (B,D,G,H,I,M,N) SECAM (B,D,G,K,K1,L)|
|I/O Connection Ports||VGA-In (15pin D-Sub) (x2), HDMI (x2: HDMI/MHLx1, HDMIx1), S-Video, Composite Video, Audio-In (RCA), Audio-In (Mini-Jack), VGA-Out (15pin D-Sub), Audio-Out (Mini-Jack), RJ45, RS-232, USB A (Power Only), USB B (Service), Microphone (Mini-Jack)|
|Dimensions (W x D x H)||287.7 x 374.5 x 122.6 mm (not including height of mirror )|
|Noise Level||37dB / 33dB (Normal / Eco. Mode)|
|Power||Supply: AC 100-240V, 50/60Hz Consumption: 320W (Eco. Mode), 380W (Normal Mode), <0.5W (Standby)|
|3D Ready(DLP link, PC+Video)||Yes|
|Spare Lamp P/N||5811119833-SVV|
|3D Glasses P/N||3534257700|
|Remote Control P/N||5041841300|
|Standard Accessories||VGA Cable, User Manual (CD), Quick Start Guide, Warranty Card (by region), Remote Controller (with battery), AC Power Cord|
|Optional Accessories||Spare Lamp P/N: 5811118004-SVV , 3D Glasses P/N: 3534257700 , Remote Control P/N: 5041841300|
|UPC Code||81309702024 6|